067 Heating with Wood: From the Forest to the Stove

*Part 1 of 2 — Designing a Complete Wood-Heating System*

Heating with Wood: From the Forest to the Stove

Heating a home with wood involves much more than purchasing a wood stove and building a fire. It begins with the land, the trees, the harvesting process, transportation, storage, and finally the stove itself. Each step influences the amount of work required, the cost of heating, and the efficiency of the entire system.

I grew up around wood heating, and when we began planning our home, Zehr Escape, in the 1980s, I wanted wood to be our primary source of heat. Nearly 40 years later, I still appreciate the warmth, independence, and satisfaction that come from heating with wood.

Wood heating is certainly not for everyone. It requires work, planning, equipment, maintenance, and an understanding of how to operate a stove properly. But for our family, it has worked exceptionally well.

Over the years, I have learned that the best wood-heating system is not necessarily the one with the most expensive equipment. It is the one designed to make the entire process efficient, safe, and practical.

Start with the Land

When we were looking for land to build our home, one of my goals was to have at least five acres of woodland, preferably more.

I had heard that a wooded acre could sustainably provide approximately five face cords of firewood annually. My thinking was that we would harvest considerably less, perhaps half that amount, allowing the forest to continue growing and renewing itself.

Looking back, I would emphasize that this was a planning estimate rather than a universal rule. A face cord is generally a stack four feet high and eight feet long, but its volume depends on the length of the firewood. Sustainable harvesting also varies tremendously with tree species, forest age, soil, climate, and woodland management.

A better approach is to evaluate how much wood the forest actually grows over time and harvest no more than can be sustainably replaced. A consulting forester can help develop a management plan that maintains forest health, wildlife habitat, and future productivity.

For us, having woodland close to home offered another advantage: less transportation and greater control over our fuel supply.

Managing a Woodland Rather Than Simply Cutting Trees

A healthy woodland is much more than a collection of trees waiting to become firewood.

Selective harvesting can provide opportunities to remove damaged, declining, or overcrowded trees while allowing healthier trees to continue growing. However, dead trees also provide valuable wildlife habitat, and some should be retained where they do not create a safety concern.

Woodland management involves balancing firewood production with forest regeneration, soil protection, biodiversity, and long-term health.

One important consideration is safety. Dead trees can be especially unpredictable, with weakened limbs and trunks that may break without warning. Harvesting them requires experience, appropriate protective equipment, and sometimes professional assistance.

The goal should be to maintain a productive, healthy forest that can serve future generations.

Seven Years in an Outdoor Woodpile: A Surprising Discovery

Recently, we helped a neighbor clean up several large piles of firewood that had been stored outdoors for approximately seven years.

The wood had originally been cut for heating, but changes in the household meant it was no longer being used as quickly. Over time, the piles became exposed to rain, snow, ground moisture, and accumulating debris.

When we began removing the wood, I was surprised by just how wet and dirty it had become. Even after seven years, much of it was thoroughly soaked.

But I was also surprised by how differently the wood species had survived.

Cherry: The cherry was in remarkably good condition. Much of the bark and outer material had deteriorated, but the interior wood remained solid and usable.

Oak: The oak also held up extremely well. Although the bark had deteriorated, much of the wood beneath it remained in good condition.

White Ash: The white ash was fairly good, too. An important consideration is that many of these ash trees had already been weakened or killed by disease or insect damage before the wood was cut, so they were not necessarily in ideal condition when the piles were created.

Maple and Birch: These species had a much more difficult time. Considerably more deterioration was evident, demonstrating how differently various woods respond to prolonged outdoor exposure.

These were observations from one real-world woodpile, not a controlled scientific experiment. Species, heartwood versus sapwood, previous tree condition, soil contact, and exposure all influence decay.

Nevertheless, the experience provided a valuable lesson: some firewood can remain surprisingly sound after years of exposure, but that does not make uncovered outdoor storage a good practice.

Wood Can Be Old and Still Be Wet

There is a common assumption that firewood becomes increasingly dry simply because it has been sitting for years.

Unfortunately, that is not always true.

Wood initially loses moisture as it seasons, but repeated exposure to rain, snow, and damp ground can introduce additional moisture. Poor airflow and tightly packed piles can also slow drying and encourage decay.

Firewood should generally be dried to a moisture content of 20 percent or less before burning. A moisture meter can help, particularly when readings are taken on a freshly split interior surface rather than on the outside of the log.

Wet wood wastes energy because some of the fire's heat must evaporate water instead of heating the home. It can also increase smoke, particulate emissions, and creosote formation.

Even solid wood recovered from an old outdoor pile may need additional drying before it is suitable for the stove.

In our neighbor's situation, the accumulated dirt was another problem. While we could manage some of the mess in our own handling and storage process, carrying dirty firewood through the living areas of a house would be inconvenient.

Soil-covered wood should be cleaned before burning, and badly decayed pieces are generally better left out of the stove.

Designing a Better Firewood Storage Area

One of the most valuable improvements to a wood-heating system is a properly designed woodshed.

Ideally, firewood should be stored off the ground, protected from rain and snow by a roof, and exposed to sufficient airflow to allow moisture to escape.

An open-sided woodshed is often an excellent solution. The roof protects the wood while the open sides encourage drying.

Good storage also considers convenience. How far must the wood be carried? Can a truck reach the storage area? Will the path remain usable during snow and ice? Can the wood be moved indoors without tracking dirt through the entire house?

At Zehr Escape, I considered these questions while designing the home. Our wood storage is immediately outside a door, and the stove is just inside, greatly reducing the distance the wood must be carried.

That decision has saved considerable work over the decades.

Stored firewood should also be kept at an appropriate distance from buildings to reduce pest and fire risks, with only a modest working supply brought indoors. A convenient outdoor storage area can be designed without compromising safety.

Handle Each Piece of Wood as Few Times as Possible

One of my strongest principles in working with firewood is simple: minimize the number of times each piece must be handled.

Every unnecessary movement requires additional time and physical effort.

Some people cut logs in the woods, load them onto a trailer, unload them at home, split them, move them to a drying area, restack them, and eventually carry them to the stove.

That can mean handling the same piece of wood many times.

Whenever practical, I prefer to cut and split the wood directly in the woods, then load it into the truck. From there, it can be unloaded directly into its storage location.

The fewer steps between the tree and the stove, the better.

Of course, safe working conditions, access, and the need to keep wood off wet ground may sometimes require additional handling. Efficiency should never come at the expense of safety.

Why I Prefer Smaller Four-Wheel-Drive Trucks

For firewood work, I have always appreciated smaller pickup trucks with four-wheel drive.

They can reach many woodland locations where larger vehicles are less convenient, and their lower bed height allows all of the loading and unloading to be done while standing on the ground. Additionally, I have learned to first cover the truck bed with a tarp before loading. Then after unloading, it can be pulled off with the tailgate down and emptied in the nearby woods, leaving the truck clean, ready for the soft roll-up cover to be closed & secured.

That is an important ergonomic advantage, particularly when moving thousands to hundreds of thousands of pieces of wood over the years.

Four-wheel drive also provides useful traction on woodland roads, uneven ground, and slippery surfaces.

Recently, our Nissan Frontier has been put back to work hauling firewood. After considerable mechanical work on the truck, it has been satisfying to see it performing well again.

Regardless of truck size, loads must remain within the manufacturer's payload and axle ratings, be properly secured, and be transported with appropriate care. Firewood is heavy, especially when wet.

Splitting Firewood by Hand

I enjoy splitting wood by hand.

In fact, I have often said that, with the right wood and a good rhythm, I can split firewood as quickly as a hydraulic wood splitter!

Whether that would hold up in a timed competition might make an entertaining video, but there are genuine advantages to hand splitting.

It requires relatively little equipment, can be done directly where the tree is cut, and eliminates the need to transport and maintain a separate powered splitter. And the additional handling of large blocks over to the splitter.

It is also excellent physical activity when performed with proper technique and reasonable limits.

Of course, some species and individual logs are much harder to split than others. Knotty, twisted, or oversized pieces may make mechanical splitting preferable.

The important consideration is choosing a method that works safely and efficiently for the person doing the work.

Woodworking Scraps: Another Useful Source of Heat

As a woodworker, I have discovered another advantage to heating with wood.

Woodworking produces offcuts, short boards, and other scraps that accumulate over time. Some are valuable for future projects, but others are too small or irregular to be useful.

Clean, dry, untreated solid-wood scraps can make excellent kindling or supplemental firewood in a stove designed to burn them.

In a properly equipped workshop, a wood stove can provide welcome warmth during colder weather while making practical use of suitable leftover material.

I enjoy being able to use a few pieces from the scrap supply rather than allowing them to accumulate unnecessarily.

However, not all woodworking waste is appropriate fuel. Pressure-treated wood, painted or finished wood, plywood, MDF, particleboard, and materials containing adhesives should not be burned in a residential wood stove. Fine sawdust and shavings can also create dangerous flare-ups and should not be added loosely to a fire.

A workshop stove must be installed and operated with particular attention to combustible dust, stored materials, chimney maintenance, and required clearances.

It is another example of how woodworking and wood heating can complement one another when managed responsibly.

Wood Heating and the Environment

I consider wood heating an important part of our approach to using local resources, but I also recognize that burning wood produces air pollution.

Wood is renewable when forests are managed sustainably. Local harvesting can reduce transportation requirements, and using suitable wood scraps can recover useful energy from material that might otherwise go to waste.

But renewable does not mean pollution-free.

Wood smoke contains fine particulate matter and other pollutants that can affect respiratory health. My own experience with smoke from Canadian wildfires reinforced how important clean air is.

It is therefore essential to operate wood-burning equipment responsibly.

Burning properly dried wood, maintaining adequate combustion air, avoiding smoldering fires, keeping equipment in good condition, and using efficient, appropriately certified stoves can significantly reduce emissions.

Forest management also matters. The carbon released during combustion must be considered alongside forest regrowth, land management, and the broader effects of harvesting and burning.

Wood heating has environmental tradeoffs, and those should be discussed openly rather than ignored.

The Most Efficient Firewood Is the Wood You Never Need to Burn

There is one more important principle that connects firewood management with home design.

A well-insulated, thoughtfully designed house requires less heat.

That means fewer trees harvested, less cutting and splitting, fewer truckloads, less carrying, and fewer emissions.

When we designed Zehr Escape, insulation and overall heating efficiency were important considerations. Reducing the amount of energy needed to maintain a comfortable home makes every part of the wood-heating process easier.

It is a reminder that heating efficiency begins long before the first fire is lit.

Looking Ahead: Designing the Home Around Wood Heat

In Part 2, we will move from the forest into the house.

We will explore why we located our wood stove on the lower level, how we considered heat movement through an open spiral staircase, why we wanted cooler bedrooms, and how we incorporated an electric thermal-storage backup heating system.

We will also discuss the importance of stove elevation, hearth design, convenient firewood access, and proper stove operation.

And I will share the story of a used wood stove I purchased for $175 in 1987, intending to replace it with a much more expensive stove after a year or two.

Nearly four decades later, that same stove is still heating our home.

For me, heating with wood has never been simply about burning logs. It is about designing an entire system that makes good use of natural resources while minimizing unnecessary work.

And when the system is thoughtfully designed, the benefits can last for generations.

Home

Where the beauty of the wood does the work.

Brad Zehr | ZehrWoodartistry.com | brad@zehr.net

About Projects Contacts

Topics & Podcast are AI Assisted

Contact Home Search